Grooving & Parting - External grooving - JSXXR/L-S - Tungaloy Cutting Tools - Metal Working Tools
EN
×
 
 
 
        
JSXXR/L-S : Parting off tools for sub spindol in swiss lathes
 
 
  DesignationHAND KAPR CWN CWX CDX CUTDIA H B LF  LH  HF WF HBH CICT CSP Torque GICATGIREMgiic
  JSXXR1010X09-S   R 90.0~0.602.508.50~16.0~10.010.0120.0026.010.00.203.01~- ~1.26734819 JXPG20... inserts are not applicable. 0
  JSXXL1010X09-S   L 90.0~0.602.508.50~16.0~10.010.0120.0026.010.05.503.01~- ~1.26734821 JXPG20... inserts are not applicable. 0
  JSXXR1212F09-S   R 90.0~0.602.508.50~16.0~12.012.085.0026.012.00.201.51~- ~1.26734822 JXPG20... inserts are not applicable. 0
  JSXXL1212F09-S   L 90.0~0.602.508.50~16.0~12.012.085.0026.012.05.501.51~- ~1.26734824 JXPG20... inserts are not applicable. 0
  JSXXR1212X09-S   R 90.0~0.602.508.50~16.0~12.012.0120.0030.012.00.201.51~- ~1.26734825 JXPG20... inserts are not applicable. 0
  JSXXL1212X09-S   L 90.0~0.602.508.50~16.0~12.012.0120.0030.012.05.501.51~- ~1.26734826 JXPG20... inserts are not applicable. 0
  JSXXR1616X09-S R 90.0~0.602.5010.50~20.0~16.016.0120.0030.016.00.200.01~- ~1.26720296 0
  JSXXL1616X09-S L 90.0~0.602.5010.50~20.0~16.016.0120.0030.016.05.500.01~- ~1.26766301 0
When JX**12... insert is used, "LF" and "LH" are shorter 2 mm. When JX**06... insert is used, "LF" and "LH" are shorter 4 mm. When JX**20... insert is used, "LF" and "LH" are longer 2 mm.
The right hand insert (JX****R...) is used for the right hand toolholders (JSXXR...), and the left hand insert (JX****L...) is used for the left hand toolholders (JSXXL...).
Torque: Recommended torque (Nm) for clamping


Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved