Threading - Int. Thread-Milling - BT-FC-HYDRO - Tungaloy Cutting Tools - Metal Working Tools
EN
mm
×
 
 
 
     
BT-FC-HYDRO : Hydraulic chuck holder with MAS-BT face contact form AD shank.
 
 
 HOLDER RUN-OUT=0.003/0.00012  HARDNESS=58-60                                     ROUGHNESS N5                                       WITH COOLANT HOLE
  DesignationSS ClampTypDCONWS BTED BD BD_2 LF LB LB_2 LSCWS ADJRGA J CRKS CSP GICATGIREMgiic
  BT30FCHYDRO6X60 BT30-FC Hydraulic chuck ~6.00023.0026.00-60.0038.0033.0037.010.00M5 M12 With coolant hole 3325357 0
  BT30FCHYDRO8X64 BT30-FC Hydraulic chuck ~8.00025.0028.0045.0064.0042.0029.0037.06.00M6 M12 With coolant hole 3325358 0
  BT30FCHYDRO10X64 BT30-FC Hydraulic chuck ~10.00027.0030.00-64.0042.0037.0042.010.00M8X1 M12 With coolant hole 3325359 0
  BT30FCHYDRO12X72 BT30-FC Hydraulic chuck ~12.00029.0032.00-72.0050.0043.0050.010.00M10X1 M12 With coolant hole 3325360 0
  BT30FCHYDRO14X70 BT30-FC Hydraulic chuck ~14.00030.0034.00-70.0048.0033.0048.010.00M8X1 M12 With coolant hole 3325361 0
  BT30FCHYDRO16X90 BT30-FC Hydraulic chuck ~16.00034.0038.00-90.0068.0052.0052.010.00M10X1 M12 With coolant hole 3325362 0
  BT30FCHYDRO18X90 BT30-FC Hydraulic chuck ~18.00036.0040.00-90.0068.0052.0052.010.00M10X1 M12 With coolant hole 3325363 0
  BT30FCHYDRO20X90 BT30-FC Hydraulic chuck ~20.00038.0042.0042.0090.0068.00-52.010.00M10X1 M12 With coolant hole 3325364 0
Chucking forces will be reduced by 25% if reduction sleeves are used.
Reduction sleeves are available for 12 and 20 mm bore diameters (ordered separately).
Clamping wrench (WRENCHHYDROHEX4) and test bar should be ordered separately.
Balanced to G2.5 max.n: 18,000 min-1
Applicable for 10 MPa coolant


Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved