Threading - Ext. Thread-Milling - Single tooth threading mills - Tungaloy Cutting Tools

Single tooth threading mills : Single tooth threading mills

Right hand(R) shown.

Designation	HAND	DC	CICT	ZEFP	NOF	Thread	TTP	THFT	TP	TPI	DCONMS	LF	LH	LU	CSP	GICAT
D23-D25-45R	R	23.00	1	1~	1~	M28 - M30	BOTH ~	VP60 ~	-~	-~	25.000	115.00	45.0	45.0~	- ~	6892926
D25-D25-45R	R	25.00	1	1~	1~	M32 - M42	BOTH ~	VP60 ~	-~	-~	25.000	115.00	45.0	45.0~	- ~	6892925
D38-D32-85R	R	38.00	2	2~	2~	M45 - M56	BOTH ~	VP60 ~	-~	-~	32.000	165.00	85.0	85.0~	- ~	6892921
D50-D42-100R	R	50.00	4	4~	4~	M58 - M68	BOTH ~	VP60 ~	-~	-~	42.000	190.00	100.0	100.0~	- ~	6892922
D55-D42-100R	R	55.00	4	4~	4~	M64 - M85	BOTH ~	VP60 ~	-~	-~	42.000	190.00	100.0	100.0~	- ~	6892927
D60-D42-100R	R	60.00	4	4~	4~	M70 - M85	BOTH ~	VP60 ~	-~	-~	42.000	190.00	100.0	100.0~	- ~	6892923
D80-D42-100R	R	80.00	6	6~	6~	M90 -	BOTH ~	VP60 ~	-~	-~	42.000	190.00	100.0	100.0~	- ~	6892924

Climb milling is recommended.
When threading a blind hole, use the right hand cutter in right hand rotation. Cut up from the bottom to prevent chip recutting.
When machining internal threads from the mouth, use the left hand cutter in left hand rotation.

Threading
Main Application

Ext. Thread-Milling
Sub Application

Site Map:

Threading Main Application

Ext. Thread-Milling Sub Application

Site Map:

Threading
Main Application

Ext. Thread-Milling
Sub Application