Milling - - EPD05 - Tungaloy Cutting Tools

EPD05 : Highly dense shoulder square endmills with small SDMT05 inserts

Right hand (R) shown.
GAMP: Rake angle axial , GAMF: Rake angle radial
Refer to the table for cylindrical and Weldon shank options.

Designation	ZEFP	CICT	NOF	APMX	DC	DCX	DCONMS	LS	LF	LH	KAPR	HAND	WT (kg)	CSP	MIID	shank	Fig.	GICAT
EPD05R012M12.0-02	2~	2	2~	4.00	12.00	12.00~	12.000	62.0	80.00	18.0	90.0	R ~	0.100	With air hole	SDMT050204PN-MJ	Cylindrical	1	6162120
EPD05R016M16.0-03	3~	3	3~	4.00	16.00	16.00~	16.000	90.0	110.00	20.0	90.0	R ~	0.200	With air hole	SDMT050204PN-MJ	Cylindrical	1	6162121
EPD05R020M20.0W04	4~	4	4~	4.00	20.00	20.00~	20.000	80.0	105.00	25.0	90.0	R ~	0.200	With air hole	SDMT050204PN-MJ	Weldon	2	6162089
EPD05R025M20.0W05	5~	5	5~	4.00	25.00	25.00~	20.000	90.0	115.00	25.0	90.0	R ~	0.300	With air hole	SDMT050204PN-MJ	Weldon	2	6162122
EPD05R032M25.0W06	6~	6	6~	4.00	32.00	32.00~	25.000	98.0	130.00	32.0	90.0	R ~	0.500	With air hole	SDMT050204PN-MJ	Weldon	2	6162123
EPD05R040M32.0W08	8~	8	8~	4.00	40.00	40.00~	32.000	100.0	140.00	40.0	90.0	R ~	0.800	With air hole	SDMT050204PN-MJ	Weldon	2	6162124

Milling
Main Application