Threading - Int. Thread-Milling - BT-HYDRO (TungHydro) - Tungaloy Cutting Tools

BT-HYDRO (TungHydro) : TungHydro hydaulic endmill chuck holders with BT shank

Designation	SS	ClampTyp	DCONWS	BTED	BD	BD_2	LF	LB	LB_2	LSCWS	ADJRGA	J	CRKS	CSP	GICAT
BT30HYDRO6X60	BT30	Hydraulic chuck ~	6.000	23.00	26.00	-	60.00	38.00	-	37.0	10.00	M5	M12	With coolant hole	4559238
BT30HYDRO8X64	BT30	Hydraulic chuck ~	8.000	25.00	28.00	45.00	64.00	42.00	-	37.0	10.00	M6	M12	With coolant hole	4559239
BT30HYDRO10X64	BT30	Hydraulic chuck ~	10.000	27.00	30.00	-	64.00	42.00	-	42.0	10.00	M8x1	M12	With coolant hole	4559240
BT30HYDRO12X72	BT30	Hydraulic chuck ~	12.000	29.00	32.00	-	72.00	50.00	-	47.0	10.00	M10x1	M12	With coolant hole	4559241
BT30HYDRO14X70	BT30	Hydraulic chuck ~	14.000	30.00	34.00	-	70.00	48.00	-	47.0	10.00	M10x1	M12	With coolant hole	4559242
BT30HYDRO16X90	BT30	Hydraulic chuck ~	16.000	34.00	38.00	50.00	90.00	68.00	47.50	52.0	10.00	M12x1	M12	With coolant hole	4559243
BT30HYDRO18X90	BT30	Hydraulic chuck ~	18.000	36.00	40.00	42.00	90.00	68.00	47.50	52.0	10.00	M12x1	M12	With coolant hole	4559244
BT30HYDRO20X90	BT30	Hydraulic chuck ~	20.000	38.00	42.00	-	90.00	68.00	47.50	52.0	10.00	M12x1	M12	With coolant hole	4559245
BT40HYDRO6X90	BT40	Hydraulic chuck ~	6.000	23.00	26.00	50.00	90.00	63.00	43.00	37.0	10.00	M5	M16	With coolant hole	4559246
BT40HYDRO8X90	BT40	Hydraulic chuck ~	8.000	25.00	28.00	50.00	90.00	63.00	43.50	37.0	10.00	M6	M16	With coolant hole	4559247
BT40HYDRO10X90	BT40	Hydraulic chuck ~	10.000	27.00	30.00	50.00	90.00	63.00	44.00	42.0	10.00	M8x1	M16	With coolant hole	4559248
BT40HYDRO12X90	BT40	Hydraulic chuck ~	12.000	29.00	32.00	50.00	90.00	63.00	44.50	47.0	10.00	M10x1	M16	With coolant hole	4559249
BT40HYDRO14X90	BT40	Hydraulic chuck ~	14.000	30.00	34.00	50.00	90.00	63.00	47.50	47.0	10.00	M10x1	M16	With coolant hole	4559250
BT40HYDRO16X90	BT40	Hydraulic chuck ~	16.000	34.00	38.00	50.00	90.00	63.00	47.50	52.0	10.00	M12x1	M16	With coolant hole	4559251
BT40HYDRO18X90	BT40	Hydraulic chuck ~	18.000	36.00	40.00	50.00	90.00	63.00	47.50	52.0	10.00	M12x1	M16	With coolant hole	4559252
BT40HYDRO20X90	BT40	Hydraulic chuck ~	20.000	42.00	38.00	50.00	90.00	63.00	47.50	52.0	10.00	M12X1	M16	With coolant hole	4559253
BT40HYDRO25X90	BT40	Hydraulic chuck ~	25.000	46.00	50.00	63.00	90.00	51.00	51.00	58.0	10.00	M12x1	M16	With coolant hole	4559254
BT40HYDRO32X110	BT40	Hydraulic chuck ~	32.000	56.00	60.00	60.00	110.00	81.50	81.50	62.0	10.00	M16x1	M16	With coolant hole	4559255
BT50HYDRO6X110	BT50	Hydraulic chuck ~	6.000	23.00	26.00	80.00	110.00	72.00	43.00	37.0	10.00	M5	M24	With coolant hole	4559256
BT50HYDRO8X100	BT50	Hydraulic chuck ~	8.000	25.00	28.00	80.00	110.00	72.00	43.50	37.0	10.00	M6	M24	With coolant hole	4559257
BT50HYDRO10X110	BT50	Hydraulic chuck ~	10.000	27.00	30.00	80.00	110.00	72.00	44.00	42.0	10.00	M8x1	M24	With coolant hole	4559258
BT50HYDRO12X110	BT50	Hydraulic chuck ~	12.000	29.00	32.00	80.00	110.00	72.00	42.00	47.0	10.00	M10x1	M24	With coolant hole	4559259
BT50HYDRO14X110	BT50	Hydraulic chuck ~	14.000	30.00	34.00	80.00	110.00	72.00	42.00	47.0	10.00	M10x1	M24	With coolant hole	4559260
BT50HYDRO16X110	BT50	Hydraulic chuck ~	16.000	34.00	38.00	80.00	110.00	72.00	45.00	52.0	10.00	M12x1	M24	With coolant hole	4559261
BT50HYDRO18X110	BT50	Hydraulic chuck ~	18.000	36.00	40.00	80.00	110.00	72.00	45.00	52.0	10.00	M12x1	M24	With coolant hole	4559262
BT50HYDRO20X110	BT50	Hydraulic chuck ~	20.000	38.00	42.00	80.00	110.00	72.00	47.50	52.0	10.00	M12x1	M24	With coolant hole	4559263
BT50HYDRO25X110	BT50	Hydraulic chuck ~	25.000	46.00	50.00	80.00	110.00	72.00	47.50	58.0	10.00	M12x1	M24	With coolant hole	4559264
BT50HYDRO32X110	BT50	Hydraulic chuck ~	32.000	56.00	60.00	80.00	110.00	72.00	47.50	64.0	10.00	M12x1	M24	With coolant hole	4559265

Clamping wrench (wrench HYDRO HEX 4) should be ordered separately.
Note: Available are reduction sleeves for 12, 20, 25 and 32 mm bore diameters.
Chucking forces will significantly reduce if reduction sleeves are used (ordered separately)

Threading
Main Application

Int. Thread-Milling
Sub Application

Site Map:

Threading Main Application

Int. Thread-Milling Sub Application

Site Map:

Threading
Main Application

Int. Thread-Milling
Sub Application