Threading - Int. Thread-Milling - BT-TUNGMAX - Tungaloy Cutting Tools - Metal Working Tools
EN
mm
×
 
 
 
     
BT-TUNGMAX : TungMax endmill chuck holders with BT shank
 
 
 HOLDER RUN-OUT=0.003/0.00012  HARDNESS=58-60                                     ROUGHNESS N5                                       WITH COOLANT HOLE
  DesignationSS ClampTypDCONWS DCONNWS DCONXWS LF LB BD BD_2 LSCWS ADJRGA J CRKS CSP GICATGIREMgiic
  BT40MAXIN20X85 BT40 Milling chuck ~20.0006.0020.0085.0058.0051.0053.0068.012.00M16 M16 With coolant hole 4505089 0
  BT40MAXIN32X108 BT40 Milling chuck ~32.0006.0032.00108.0081.0069.0070.0083.013.00M16 M16 With coolant hole 4504294 0
  BT50MAXIN20X105   BT50 Milling chuck ~20.0006.0020.00105.0067.0051.0053.0069.013.00M16 M24 With coolant hole 4504482 Balanced to G6.3 at 8,000 min-1 0
  BT50MAXIN32X106   BT50 Milling chuck ~32.0006.0032.00106.0068.0069.0070.0083.014.00M20x2 M24 With coolant hole 4501270 Balanced to G6.3 at 8,000 min-1 0
  BT50MAXIN32X135   BT50 Milling chuck ~32.0006.0032.00135.0097.0069.0070.0084.015.00M20x2 M24 With coolant hole 4504922 Balanced to G6.3 at 8,000 min-1 0
Applicable for 10 MPa coolant.
Wrench is not included.


Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved