Threading - Ext-Threading - CER/L - Tungaloy Cutting Tools - Metal Working Tools
EN
×
 
 
 
  
CER/L : External threading toolholders, Altanative clamping of screw-on or clamp-on (DT type only)
Right hand (R) shown.
 
Right hand (R) shown.
 
  DesignationHAND KAPR H B LF LH HF WF CDX RE CICT SC EPSR AN CSP GICATGIREMgiic
  CER1212H16DT R 90.0~12.012.0100.0024.012.016.001.80~-~1~- ~-~0.0~- ~6815376 0
  CEL1212H16DT L 90.0~12.012.0100.0024.012.016.001.80~-~1~- ~-~0.0~- ~6815371 0
  CER1616H16DT R 90.0~16.016.0100.0024.016.020.001.80~-~1~- ~-~0.0~- ~6815377 0
  CEL1616H16DT L 90.0~16.016.0100.0024.016.020.001.80~-~1~- ~-~0.0~- ~6815372 0
  CER2020K16DT R 90.0~20.020.0125.0024.020.025.001.80~-~1~- ~-~0.0~- ~6815378 0
  CEL2020K16DT L 90.0~20.020.0125.0024.020.025.001.80~-~1~- ~-~0.0~- ~6815373 0
  CER2525M16DT R 90.0~25.025.0150.0028.025.032.001.80~-~1~- ~-~0.0~- ~6815644 0
  CEL2525M16DT L 90.0~25.025.0150.0028.025.032.001.80~-~1~- ~-~0.0~- ~6815374 0
  CER2525M22DT R 90.0~25.025.0150.0031.325.032.001.80~-~1~- ~-~0.0~- ~6815379 0
  CEL2525M22DT L 90.0~25.025.0150.0031.325.032.001.80~-~1~- ~-~0.0~- ~6815375 0
  CER3232P16T R 90.0~32.032.0170.0032.032.040.001.80~-~1~- ~-~0.0~- ~6801512 0
  CER3232P22T R 90.0~32.032.0170.0032.032.040.001.80~-~1~- ~-~0.0~- ~6801513 0
  CER2525M27T R 90.0~25.025.0150.0034.025.032.001.80~-~1~- ~-~0.0~- ~6801511 0
  CER3232P27T R 90.0~32.032.0170.0034.032.040.001.80~-~1~- ~-~0.0~- ~6801514 0
Note:
A clamp set for CER/L type consists of a clamp and a clamping screw.
A shim set for CER/L type consists of a shim and a shim screw.
Standard shims for CER/L type can be used for both left hand and right hand toolholders.Use either of the sides depending on the hand.


Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved