Grade : AH710 - Tungaloy Cutting Tools - Metal Working Tools
EN
×
 
 
 

Grade : AH710

PVD coated grade for grooving, milling, drilling

PropertyValue
ISO Range - P/M/K(P05-P15)(M20-M35)(K15-K30)
ISO Range - N/S/H (H)(S)(N)

PropertyValue




Cutting Speed for: MTECI03019C5A60 AH710 - 3329685
ISOMaterialsMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :125100-250 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :19080-210 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :25065-170 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :220110-180 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :30095-160 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :20090-160 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :27565-200 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :30070-210 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :35095-160 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :200130-170 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :32575-100 m/min
P12Stainless steel and cast steel.Ferritic/martensitic :200110-170 m/min
P13Stainless steel and cast steel.Martensitic :24070-155 m/min
M14Stainless steel and cast steel.Austenitic :18085-100 m/min
K15Grey cast iron (GG)Pearlitic/ferritic :180120-160 m/min
K16Grey cast iron (GG)Pearlitic/martensiti :26075-160 m/min
K17Nodular cast iron (GGG)Ferritic :16070-150 m/min
K18Nodular cast iron (GGG)Pearlitic :250110-140 m/min
K19Malleable cast iron.Ferritic :130120-160 m/min
K20Malleable cast iron.Pearlitic :230110-140 m/min
N21Aluminum-wrought alloy.Not cureable : 60160-300 m/min
N22Aluminum-wrought alloy.Cured :100160-300 m/min
N23Aluminum-cast, alloyed <12% Si.Not cureable : 75150-350 m/min
N24Aluminum-cast, alloyed.Cured : 90150-350 m/min
N25Aluminum-cast, alloyed >12% Si.High temperature :130100-250 m/min
N29Non metallic.Duro& fiber plastics : 60100-400 m/min
N30Non metallicHard rubber : 55100-400 m/min
S33High temp. alloys. Ni or Co based.Annealed :25020-80 m/min
S34High temp. alloys. Ni or Co based.Cured :35020-80 m/min
S35High temp. alloys. Ni or Co based.Castr :32020-80 m/min
S36Titanium Ti alloys.:31020-80 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :31020-80 m/min
H38Hardened steel.Hardened :56055-65 m/min
H39Hardened steel.Hardened :65445-55 m/min
H40Chilled cast iron.Cast :40090-105 m/min
H41Cast iron.Hardened :56055-65 m/min

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved