| ISO | Materials | Material Designation | Material Condition | Cutting Speed Recommendations (Vc) |
| P | 1 | Non-alloy steel and cast steel, free cutting steel <0.25%C. | Annealed :125 | 80-140 m/min |
| P | 2 | Non-alloy steel and cast steel, free cutting steel >=0.25%C. | Annealed :190 | 80-140 m/min |
| P | 3 | Non-alloy steel and cast steel, free cutting steel <0.55%C. | Quench and tempered. :250 | 80-140 m/min |
| P | 4 | Non-alloy steel and cast steel, free cutting steel >=0.55%C. | Annealed :220 | 80-140 m/min |
| P | 5 | Non-alloy steel and cast steel, free cutting steel >=0.55%C. | Quenched & tempered. :300 | 80-140 m/min |
| P | 6 | Low alloy & cast steel (less than 5% of alloying elements). | Annealed :200 | 70-120 m/min |
| P | 7 | Low alloy & cast steel (less than 5% of alloying elements). | Quenched & tempered :275 | 70-120 m/min |
| P | 8 | Low alloy & cast steel (less than 5% of alloying elements). | Quenched & tempered :300 | 40-90 m/min |
| P | 9 | Low alloy & cast steel (less than 5% of alloying elements). | Quenched & tempered :350 | 40-90 m/min |
| P | 10 | High alloyed steel, cast steel and tool steel. | Annealed :200 | 40-90 m/min |
| P | 11 | High alloyed steel, cast steel and tool steel. | Quenched & tempered :325 | 40-90 m/min |
| P | 12 | Stainless steel and cast steel. | Ferritic/martensitic :200 | 30-80 m/min |
| P | 13 | Stainless steel and cast steel. | Martensitic :240 | 30-80 m/min |
| M | 14 | Stainless steel and cast steel. | Austenitic :180 | 30-80 m/min |
| K | 15 | Grey cast iron (GG) | Pearlitic/ferritic :180 | 80-180 m/min |
| K | 16 | Grey cast iron (GG) | Pearlitic/martensiti :260 | 80-180 m/min |
| K | 17 | Nodular cast iron (GGG) | Ferritic :160 | 80-140 m/min |
| K | 18 | Nodular cast iron (GGG) | Pearlitic :250 | 80-140 m/min |
| K | 19 | Malleable cast iron. | Ferritic :130 | 80-140 m/min |
| K | 20 | Malleable cast iron. | Pearlitic :230 | 80-140 m/min |
| N | 21 | Aluminum-wrought alloy. | Not cureable : 60 | 80-220 m/min |
| N | 22 | Aluminum-wrought alloy. | Cured :100 | 80-220 m/min |
| N | 23 | Aluminum-cast, alloyed <12% Si. | Not cureable : 75 | 80-220 m/min |
| N | 24 | Aluminum-cast, alloyed. | Cured : 90 | 80-220 m/min |
| N | 25 | Aluminum-cast, alloyed >12% Si. | High temperature :130 | 80-220 m/min |
| N | 26 | Copper alloys >1% pb. | Free cutting :110 | 80-220 m/min |
| N | 27 | Copper alloys. | Brass : 90 | 80-220 m/min |
| N | 28 | Copper alloys. | Electrolitic copper :100 | 80-220 m/min |
| S | 31 | High temp. alloys Fe based. | Annealed :200 | 20-50 m/min |
| S | 32 | High temp. alloys Fe based. | Cured :280 | 20-50 m/min |
| S | 33 | High temp. alloys. Ni or Co based. | Annealed :250 | 20-50 m/min |
| S | 34 | High temp. alloys. Ni or Co based. | Cured :350 | 20-50 m/min |
| S | 35 | High temp. alloys. Ni or Co based. | Castr :320 | 20-50 m/min |
| S | 36 | Titanium Ti alloys. | :310 | 20-50 m/min |
| S | 37 | Titanium Ti alloys. | Alpha+beta alloys cu :310 | 20-50 m/min |
| H | 38 | Hardened steel. | Hardened :560 | 20-50 m/min |
| H | 39 | Hardened steel. | Hardened :654 | 20-50 m/min |
| H | 40 | Chilled cast iron. | Cast :400 | 20-50 m/min |
| H | 41 | Cast iron. | Hardened :560 | 20-50 m/min |