Grade : TH10 - Tungaloy Cutting Tools - Metal Working Tools
EN
×
 
 
 

Grade : TH10

Uncoated cemented carbide.

PropertyValue
ISO Range - P/M/K(K10)
ISO Range - N/S/H (H10)(S10)(N10)

PropertyValue




Cutting Speed for: 15GR200 TH10 - 6800140
ISOMaterialsMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :12540-150 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :19040-150 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :25040-150 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :22040-150 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :30040-150 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :20040-150 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :27540-150 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :30040-150 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :35040-150 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :20040-150 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :32540-150 m/min
K15Grey cast iron (GG)Pearlitic/ferritic :18050-100 m/min
K16Grey cast iron (GG)Pearlitic/martensiti :26050-100 m/min
K17Nodular cast iron (GGG)Ferritic :16050-90 m/min
K18Nodular cast iron (GGG)Pearlitic :25050-90 m/min
K19Malleable cast iron.Ferritic :13050-90 m/min
K20Malleable cast iron.Pearlitic :23050-90 m/min
N21Aluminum-wrought alloy.Not cureable : 6060-150 m/min
N22Aluminum-wrought alloy.Cured :10060-150 m/min
N23Aluminum-cast, alloyed <12% Si.Not cureable : 7560-150 m/min
N24Aluminum-cast, alloyed.Cured : 9060-150 m/min
N25Aluminum-cast, alloyed >12% Si.High temperature :13060-150 m/min
N26Copper alloys >1% pb.Free cutting :11060-150 m/min
N27Copper alloys.Brass : 9060-150 m/min
N28Copper alloys.Electrolitic copper :10060-150 m/min
N29Non metallic.Duro& fiber plastics : 6060-150 m/min
N30Non metallicHard rubber : 5560-150 m/min
S31High temp. alloys Fe based.Annealed :20010-35 m/min
S32High temp. alloys Fe based.Cured :28010-35 m/min
S33High temp. alloys. Ni or Co based.Annealed :25010-35 m/min
S34High temp. alloys. Ni or Co based.Cured :35010-35 m/min
S35High temp. alloys. Ni or Co based.Castr :32010-35 m/min
S36Titanium Ti alloys.:31015-45 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :31015-45 m/min

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2022Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved