Grade : YH170 - Tungaloy Cutting Tools - Metal Working Tools
EN
×
 
 
 

Grade : YH170



PropertyValue
ISO Range - P/M/K(P)(M)(K)
ISO Range - N/S/H (H)(S)(N)

PropertyValue




Cutting Speed for: DSM-CP90 YH170 - 6844088
ISOMaterialsMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :1255-60 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :1905-60 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :2505-60 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :2205-60 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :3005-60 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :2005-60 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :2755-60 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :3005-60 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :3505-60 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :2005-60 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :3255-60 m/min
P12Stainless steel and cast steel.Ferritic/martensitic :2002-20 m/min
P13Stainless steel and cast steel.Martensitic :2402-20 m/min
M14Stainless steel and cast steel.Austenitic :1802-20 m/min
K15Grey cast iron (GG)Pearlitic/ferritic :1805-50 m/min
K16Grey cast iron (GG)Pearlitic/martensiti :2605-50 m/min
K17Nodular cast iron (GGG)Ferritic :1605-50 m/min
K18Nodular cast iron (GGG)Pearlitic :2505-50 m/min
K19Malleable cast iron.Ferritic :1305-50 m/min
K20Malleable cast iron.Pearlitic :2305-50 m/min
N21Aluminum-wrought alloy.Not cureable : 6010-50 m/min
N22Aluminum-wrought alloy.Cured :10010-50 m/min
N23Aluminum-cast, alloyed <12% Si.Not cureable : 7510-50 m/min
N24Aluminum-cast, alloyed.Cured : 9010-50 m/min
N25Aluminum-cast, alloyed >12% Si.High temperature :13010-50 m/min
N26Copper alloys >1% pb.Free cutting :11010-50 m/min
N27Copper alloys.Brass : 9010-50 m/min
N28Copper alloys.Electrolitic copper :10010-50 m/min
S31High temp. alloys Fe based.Annealed :2002-20 m/min
S32High temp. alloys Fe based.Cured :2802-20 m/min
S33High temp. alloys. Ni or Co based.Annealed :2502-20 m/min
S34High temp. alloys. Ni or Co based.Cured :3502-20 m/min
S35High temp. alloys. Ni or Co based.Castr :3202-20 m/min
S36Titanium Ti alloys.:3102-20 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :3102-20 m/min
H38Hardened steel.Hardened :5602-20 m/min
H39Hardened steel.Hardened :6542-20 m/min
H40Chilled cast iron.Cast :4002-20 m/min
H41Cast iron.Hardened :5602-20 m/min

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved