External Turning - Inserts - Tungaloy Cutting Tools - Metal Working Tools
EN
×
 
 
 

External Turning
Main Application

Inserts
Sub Application
   ☰
×


CNMG*E-PM
Negative relief angle, M class, 80 deg rhombic insert for medium cutting


CNMG*E-PS
Negative relief angle, M class, 80 deg rhombic insert for finishing


1QP-CPMT
Positive 11 deg relief angle, M class, 80 deg rhombic PCD insert


DNMG*E-PM
Negative relief angle, M class, 55 deg rhombic insert for medium cutting


DNMG*E-PS
Negative relief angle, M class, 55 deg rhombic insert for finishing


TNMG*E-PM
Negative relief angle, M class, triangular insert for medium cutting


TNMG*E-TS
Negative relief angle, M class, triangular insert for finishing


TNMG*E-PS
Negative relief angle, M class, triangular insert for finishing


TNMG*E-ZF
Negative relief angle, M class, triangular insert for finishing mild steel


TNMG*E-ZM
Negative relief angle, M class, triangular insert for finishing to medium cutting


1QP-TPMH
Positive 11 deg relief angle, M class, triangular PCD insert


1QP-TPMT
Positive 11 deg relief angle, M class, triangular PCD insert


1QP-VBMT
Positive 5 deg relief angle, M class, 35 deg rhombic PCD insert


VNMG*E-PM
Negative relief angle, M class, 35 deg rhombic insert for medium cutting


VNMG*E-TS
Negative relief angle, M class, 35 deg rhombic insert for finishing


VNMG*E-PS
Negative relief angle, M class, 35 deg rhombic insert for finishing


WNMG*E-PM
Negative relief angle, M class, trigon insert for medium cutting


WNMG*E-PS
Negative relief angle, M class, trigon insert for finishing


1QP-WNMM
Negative relief angle, M class, trigon PCD insert


DTV
Double-ended insert for profiling, with 35 deg nose angle.


JXBM12R-F
Double-ended insert for back turning, with 3D chipbreaker, sharp cutting edge.


JVBN**R/L
Double-ended insert for back turning


CNMG-TM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG*E-TM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG-PM
Negative relief ang., M class, 80 deg rhombic insert for medium cutting


CNMG-AM
Negative relief ang., M class, 80deg rhombic insert, for high-feed machining in medium of steel


CNMG-NM
Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CNMG-TQ
Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CNMG-TA
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG-ZM
Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CNMG*E-ZM
Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CNMG-DM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG
Negative relief ang., M class, 80deg rhombic insert, all-round chipbreaker for medium cutting


CNMG-27
Negative relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CNMG/CNGG-28
Negative relief ang., M class, 80deg rhombic insert, for Medium Finishing


CNMG-33
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG-37
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG-38
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG-SDM
Negative relief ang., M class, 80 deg rhombic insert for medium cutting


CNMG-SM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting of stainless steel


CNMG*E-SM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting of stainless steel


CNMG-CM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting of grey and ductile cast iron


CNGGR/L-P
Negative relief ang., G class, 80deg rhombic insert, for medium cutting


CNMG-HRM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting to finishing of super alloy


CNMG-HMM
Negative relief ang., M class, 80deg rhombic insert, for medium cutting of super alloy


CNMG-SA
Negative relief ang., M class, 80deg rhombic insert, for medium cutting of stainless steel etc.


CNMGR/L-S
Negative relief ang., M class, 80deg rhombic insert, for medium cutting


CNMG-TF
Negative relief ang., M class, 80deg rhombic insert, for precision finishing


CNMG*E-TF
Negative relief ang., M class, 80 deg rhombic inserts for precision finishing


CNGG-01
Negative relief ang., G class, 80deg rhombic insert, for precision finishing


CNGGR/L-C
Negative relief ang., G class, 80deg rhombic insert, for precision finishing


CNMG-TSF
Negative relief ang., M class, 80deg rhombic insert, for finishing


CNMG*E-TSF
Negative relief ang., M class, 80deg rhombic insert, for finishing


CNMG-PS
Negative relief ang., M class, 80 deg rhombic insert for finishing


CNMG-FW
Negative relief ang., M class, 80deg rhombic insert with wiper edge, for finishing.


CNMG*E-FW
Negative relief ang., M class, 80deg rhombic insert with wiper edge, for finishing.


CNMG-AFW
Negative relief ang., M class, 80deg rhombic insert, for finishing


CNMG-ZF
Negative relief angle, M class, 80 deg rhombic insert for finishing mild steel


CNMG*E-ZF
Negative relief angle, M class, 80 deg rhombic insert for finishing mild steel


CNMG-17
Negative relief ang., M class, 80deg rhombic insert, for finishing of mild steel


CNMG-11
Negative relief ang., M class, 80deg rhombic insert, for finishing


CNMG-SF
Negative relief ang., M class, 80deg rhombic insert, for finishing of stainless steel


CNMG-CF
Negative relief ang., M class, 80deg rhombic insert, for finishing of grey and ductile cast Iron


CNMG-HRF
Negative relief ang., M class, 80deg rhombic insert, for finishing of super alloy


CNMG-TS
Negative relief ang., M class, 80deg rhombic insert, for finishing


CNMG*E-TS
Negative relief ang., M class, 80deg rhombic insert for finishing


CNMG-SW
Negative relief ang., M class, 80deg rhombic insert with wiper edge, for finishing to medium cutting


CNMG*E-SW
Negative relief ang., M class, 80deg rhombic insert with wiper edge, for finishing to medium cutting


CNMG-ASW
Negative relief ang., M class, 80deg rhombic insert, for high feed and small depth of cut


CNMG-AS
Negative relief ang., M class, 80deg rhombic insert, for high feed and small depth of cut


CNMG-CB
Negative relief ang., M class, 80deg rhombic insert, doubledsided chipbreaker for boring


CNMG-NS
Negative relief ang., M class, 80deg rhombic insert, for finishing


CNMG-SS
Negative relief ang., M class, 80deg rhombic insert, for finishing of stainless steel etc.


CNMG*E-SS
Negative relief ang., M class, 80deg rhombic insert, for finishing of stainless steel etc.


CNMG-TH
Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting


CNMG-THS
Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting


CNMM-57
Negative relief ang., M class, 80deg rhombic insert, for heavy cutting


CNMM-TRS
Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting


CNMM-TU
Negative relief ang., M class, 80deg rhombic insert, for heavy cutting


CNMM-TUS
Negative relief ang., M class, 80deg rhombic insert, for heavy cutting


CNMM-65
Negative relief ang., M class, 80deg rhombic insert, for heavy cutting


CNMG-SH
Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting of stainless steel


CNMG-CH
Negative relief ang., M class, 80deg rhombic insert, for medium to heavy cutting of grey and ductile cast iron


CNM/GA
Negative relief ang., M/G class, 80deg rhombic insert, without chipbreaker for finishing to medium cutting


CNMA*E
Negative relief ang., M class, 80deg rhombic insert, without chipbreaker for finishing to medium cutting


CNMA-W
Negative relief ang., M class, 80deg rhombic insert with wiper


CNM/GN
Negative relief ang., M/G class, 80deg rhombic ceramic insert, without chipbreaker


CNM/GX
Negative relief ang., M/G class, 80deg rhombic ceramic insert without chipbreaker


CNGD
DimpleFX series, Negative relief ang., G class, 80deg rhombic ceramic insert with dimple for cast iron cutting


CNGN-E/T1
Negative relief ang., G class, 80deg rhombic ceramic insert without chipbreaker for machining high temperature alloy


CNGA-QBN
Negative relief ang., G class, 80deg rhombic CBN insert


2QP-CNM/GA
Negative relief angle, M/G class, 80 deg rhombic CBN insert


2QP-CNGM-HM
Negative relief ang., G class, 80deg rhombic CBN insert, with chipbreaker for medium cutting to roughing


2QP-CNGM-HS
Negative relief angle, G class, 80 deg rhombic CBN insert with chipbreaker for finishing hardened steel.


2QP-CNGM-HF
Negative relief ang., G class, 80deg rhombic CBN insert, with chipbreaker for finishing


2QP-CNGM-HP
Negative relief angle, G class, 80 deg rhombic CBN insert with chipbreaker for finishing of hardened steel


4QP-CNM/GA
Negative relief ang., M/G class, 80deg rhombic CBN insert


4QP-CNGG-HM
Negative relief ang., G class, 80deg rhombic CBN insert with chipbreaker for medium cutting to roughing


4QP-CNGG-HF
Negative relief ang., G class, 80deg rhombic CBN insert with chipbreaker for finishing


4QS-CNGA
Negative relief angle, G class, 80 deg rhombic CBN insert


4QS-CNGG-HM
Negative relief ang., G class, 80deg rhombic CBN insert with chipbreaker


4QS-CNGG-HS
Negative relief angle, G class, 80 deg rhombic CBN insert with chipbreaker for finishing hardened steel.


4QS-CNGG-HF
Negative relief angle, G class, 80 deg rhombic CBN insert with chipbreaker


4QS-CNGG-HP
Negative relief angle, G class, 80 deg rhombic CBN insert with chipbreaker for finishing hardened steel


S-CNGN
Negative relief ang., G class, 80deg rhombic CBN insert


GNMG*E-TM
Negative relief ang., M class insert with corner angle 70 degree for existing toolholder carrying CN**0904**E insert.


GNMG*E-TSF
Negative relief ang., M class insert with corner angle 70 degree for existing toolholder carrying CN**0904**E insert.


2QP-GNGA
Negative relief angle, G class CBN insert with corner angle 70 deg, for existing toolholder carrying CN**1204 insert.


2QP-GNGG-HS
Negative relief angle, G class CBN insert with corner angle 70 deg for existing toolholder carrying CN**1204 insert.


2QP-GNGG-HP
Negative relief ang., G class CBN insert with corner angle 70 degree for existing toolholder carrying CN**1204 insert.


CNMM-DIA
Negative relief angle, M class, 80 deg rhombic PCD insert


CNGA-DIA
Negative relief ang., G class, 80deg rhombic PCD insert


CCGT
Positive 7deg relief ang., G class, 80deg rhombic insert, all-round type chipbreaker


CCGT-01
Positive 7 deg relief angle, G class, 80 deg rhombic insert, for precision finishing


CCGT-AL
Positive 7deg relief ang., G class, 80deg rhombic insert, for aluminum cutting


CCGT-JP
Positive 7 deg relief angle, G class, 80 deg rhombic insert for precision finishing


CCGT-JS
Positive 7 deg relief angle, G class, 80 deg rhombic insert for finishing to medium cutting


CCGT-R/L
Positive 7deg relief ang., G class, 80deg rhombic insert, lead type chipbreaker for finishing to medium cutting


CCGTR/L-J10
Positive 7 deg relief angle, G class, 80 deg rhombic insert for finishing to medium cutting


CCGTR/L-W08
Positive 7 deg relief angle, G class, 80 deg rhombic insert, lead type chipbreaker for finishing


CCGTR/L-W15
Positive 7deg relief ang., G class, 80deg rhombic insert, lead type chipbreaker for finishing


CCGTR/L-W20
Positive 7deg relief ang., G class, 80deg rhombic insert, lead type chipbreaker for finishing


CCGT#N-JS
Positive 7 deg relief angle, G class, 80 deg rhombic insert, for turning on small lathes


CCMT-23
Positive 7deg relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CCMT-24
Positive 7deg relief ang., M class, 80deg rhombic insert, for medium cutting


CCMT-CM
Positive 7deg relief ang., M class, 80deg rhombic insert, for multi-purpose cutting of grey and ductile cast iron


CCMT-PF
Positive 7deg relief ang., M class, 80deg rhombic insert, for finishing


CCMT-PM
Positive 7deg relief ang., M class, 80deg rhombic insert, for medium cutting


CCMT-PS
Positive 7deg relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CCMT-PSF
Positive 7deg relief ang., M class, 80deg rhombic insert, for finishing


CCMT-PSS
Positive 7deg relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CCMT-SW
Positive 7deg relief ang., M class, 80deg rhombic insert with wiper edge for finishing to medium cutting


CCMT-TSF
Positive 7deg relief ang., M class, 80deg rhombic inserts for finishing to medium cutting


CCMT-TM
Positive 7deg relief ang., M class, 80deg rhombic inserts for finishing to medium cutting


CCM/GW
Positive 7deg relief ang., M/G class, 80deg rhombic insert, without chipbreaker for finishing to medium cutting


2QP-CCGT-HS
Positive 7 deg relief angle, G class, 80 deg rhombic CBN insert with chipbreaker for finishing hardened steel.


2QP-CCGT-HP
Positive 7 deg relief angle, G class, 80 deg rhombic CBN insert with chipbreaker for finishing of hardened steel


Q-CCMW
Positive 7deg relief ang., M class, 80deg rhombic CBN insert


1QP-CCGW
Positive 7deg relief ang., G class, 80deg rhombic CBN insert


2QP-CCM/GW
Positive 7 deg relief angle, M/G class, 80 deg rhombic CBN insert


1QP-CCGT-NS
Positive 7 deg relief angle, G class, 80 deg rhombic PCD insert with chipbreaker


CCGW-DIA
Positive 7 deg relief angle, G class, 80 deg rhombic PCD insert


CCMT-DIA
Positive 7 deg relief angle, M class, 80 deg rhombic PCD insert


CPMT-PS
Positive 11deg relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CPMT-TM
Positive 11deg relief ang., M class, 80deg rhombic inserts for finishing to medium cutting


CPMT-CM
Positive 11deg relief ang., M class, 80deg rhombic insert, for multi-purpose cutting of grey and ductile cast iron


CPMT
Positive 11deg relief ang., M class, 80deg rhombic insert, for supper alloy cutting


CPMW
Positive 11deg relief ang., M class, 80deg rhombic insert, without chipbreaker for finishing to medium cutting


CPMT-PM
Positive 11deg relief ang., M class, 80deg rhombic insert, for medium cutting


CPMT-24
Positive 11deg relief ang., M class, 80deg rhombic insert, for medium cutting


CPMT-PSS
Positive 11deg relief ang., M class, 80deg rhombic insert, for finishing to medium cutting


CPMT-PSF
Positive 11deg relief ang., M class, 80deg rhombic insert, for finishing


CPMT-PF
Positive 11deg relief ang., M class, 80deg rhombic insert, for finishing


CPMT-TSF
Positive 11deg relief ang., M class, 80deg rhombic inserts for finishing to medium cutting


CPGTR/L-W15
Positive 11deg relief ang., G class, 80deg rhombic insert, lead type chipbreaker for finishing


CPGTR/L-W20
Positive 11deg relief ang., G class, 80deg rhombic insert, lead type chipbreaker for finishing


2QP-CPGW
Positive 11 deg relief ang., G class, 80 deg rhombic CBN insert


CPGA-QBN
Positive 11deg relief ang., G class, 80deg rhombic CBN insert


CPGA-DIA
Positive 11deg relief ang., G class, 80deg rhombic PCD insert


DCETR/L-JPP
Positive 7deg relief ang., E class, 55deg rhombic insert, parallel type chipbreaker for profiling on small lathes


DCETR/L-JRP
Positive 7deg relief ang., E class, 55deg rhombic insert, lead (ramp) type chipbreaker for cutting on small lathes


DCET-JSP
Positive 7deg relief ang., E class, 55deg rhombic insert, neutral type chipbreaker for cutting on small lathes


DCGT
Positive 7deg relief ang., G class, 55deg rhombic insert, all-round type chipbreaker


DCGT-01
Positive 7 deg relief angle, G class, 55 deg rhombic insert, for precision finishing


DCGT-AL
Positive 7deg relief ang., G class, 55deg rhombic insert, for aluminum cutting


DCGTR/L-J10
Positive 7 deg relief angle, G class, 55 deg rhombic insert for finishing to medium cutting


DCGT-JP
Positive 7 deg relief angle, G class, 55 deg rhombic insert for precision finishing


DCGT-JS
Positive 7 deg relief angle, G class, 55 deg rhombic insert for finishing to medium cutting


DCGT-R/L
Positive 7deg relief ang., G class, 55deg rhombic insert, lead type chipbreaker for finishing to medium cutting


DCGTR/L-W10
Positive 7deg relief ang., G class, 55deg rhombic insert, lead type chipbreaker for finishing


DCGTR/L-W15
Positive 7deg relief ang., G class, 55deg rhombic insert, lead type chipbreaker for finishing


DCMT-23
Positive 7deg relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DCMT-24
Positive 7deg relief ang., M class, 55deg rhombic insert, for medium cutting


DCMT-CM
Positive 7deg relief ang., M class, 55deg rhombic insert, for multi-purpose cutting of grey and ductile cast iron


DCMT-PF
Positive 7deg relief ang., M class, 55deg rhombic insert, for finishing


DCMT-PM
Positive 7deg relief ang., M class, 55deg rhombic insert, for medium cutting


DCMT-PS
Positive 7deg relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DCMT-PSF
Positive 7deg relief ang., M class, 55deg rhombic insert, for finishing


DCMT-PSS
Positive 7deg relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DCM/GW
Positive 7deg relief ang., M/G class, 55deg rhombic insert, without chipbreaker for finishing to medium cutting


2QP-DCM/GW
Positive 7 deg relief angle, M/G class, 55 deg rhombic CBN insert


Q-DCMW
Positive 7deg relief ang., M class, 55deg rhombic CBN insert


1QP-DCGT-NS
Positive 7 deg relief angle, G class, 55 deg rhombic PCD insert with chipbreaker


DCGW-DIA
Positive 7 deg relief angle, G class, 55 deg rhombic PCD insert


DCMT-DIA
Positive 7 deg relief angle, M class, 55 deg rhombic PCD insert


2QP-DCGT-HS
Positive 7 deg relief angle, G class, 55 deg rhombic CBN insert with chipbreaker for finishing hardened steel.


2QP-DCGT-HP
Positive 7deg relief ang., G class, 55deg rhombic CBN insert chipbreaker for finishing of hardened steel


DCMT-TSF
Positive 7deg relief ang., M class, 55deg rhombic inserts for finishing to medium cutting


DCMT-TM
Positive 7deg relief ang., M class, 55deg rhombic inserts for finishing to medium cutting


DPMT-PS
Positive 11deg relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DPMT-TSF
Positive 11 deg relief angle, M class, 55 deg rhombic insert, for finishing


DPMT-TM
Positive 11 deg relief angle, M class, 55 deg rhombic insert, for medium cutting


2D-DCMT-ZF
Positive 7 deg relief angle, M class, 55 deg rhombic insert with Y-PRISM's safe lock design.


DNGD
DimpleFX series, Negative relief ang., G class, 55deg rhombic ceramic insert with dimple for cast iron cutting


DNGG-01
Negative relief ang., G class, 55deg rhombic insert, for precision finishing


DNGGR/L-P
Negative relief ang., G class, 55deg rhombic insert, for medium cutting


DNGG-R/L
Negative relief ang., G class, 55deg rhombic insert, parallel type chipbreaker for medium cutting


DNGN
Negative relief ang., G class, 55deg rhombic insert without chipbreaker for finishing to medium cutting


DNM/GA
Negative relief ang., M/G class, 55deg rhombic insert, without chipbreaker for finishing to medium cutting


DNMG
Negative relief ang., M class, 55deg rhombic insert, all-round chipbreaker for medium cutting


DNMG-11
Negative relief ang., M class, 55deg rhombic insert, for finishing


DNMG-17
Negative relief ang., M class, 55deg rhombic insert, for finishing of mild steel


DNMG-27
Negative relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DNMG-33
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMG-37
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMG-38
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMG-AS
Negative relief ang., M class, 55deg rhombic insert, for high feed and small depth of cut


DNMG-CB
Negative relief ang., M class, 55deg rhombic insert, doubledsided chipbreaker for boring


DNMG-CF
Negative relief ang., M class, 55deg rhombic insert, for finishing of grey and ductile cast Iron


DNMG-CH
Negative relief ang., M class, 55deg rhombic insert, for medium to heavy cutting of grey and ductile cast iron


DNMG-CM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting of grey and ductile cast iron


DNMG-DM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMG-HMM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting of super alloy


DNMG-NM
Negative relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DNMG-NS
Negative relief ang., M class, 55deg rhombic insert, for finishing


DNMGR/L-S
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMG-SF
Negative relief ang., M class, 55deg rhombic insert, for finishing of stainless steel


DNMG-SH
Negative relief ang., M class, 55deg rhombic insert, for medium to heavy cutting of stainless steel


DNMG-SDM
Negative relief ang., M class, 55 deg rhombic insert for medium cutting


DNMG-SM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting of stainless steel


DNMG*E-SM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting of stainless steel


DNMG-SS
Negative relief ang., M class, 55deg rhombic insert, for finishing of stainless steel etc.


DNMG*E-SS
Negative relief ang., M class, 55deg rhombic insert, for finishing of stainless steel etc.


DNMG-TF
Negative relief ang., M class, 55deg rhombic insert, for precision finishing


DNMG*E-TF
Negative relief ang., M class, 55deg rhombic inserts for precision finishing


DNMG-TH
Negative relief ang., M class, 55deg rhombic insert, for medium to heavy cutting


DNMG-TM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMG*E-TM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMG-PM
Negative relief ang., M class, 55 deg rhombic insert for medium cutting


DNMG-TS
Negative relief ang., M class, 55deg rhombic insert, for finishing


DNMG*E-TS
Negative relief ang., M class, 55deg rhombic insert for finishing


DNMG-TSF
Negative relief ang., M class, 55deg rhombic insert, for finishing


DNMG*E-TSF
Negative relief ang., M class, 55deg rhombic insert, for finishing


DNMG-PS
Negative relief ang., M class, 55 deg rhombic insert for finishing


DNMG-ZF
Negative relief angle, M class, 55 deg rhombic insert for finishing mild steel


DNMG*E-ZF
Negative relief angle, M class, 55 deg rhombic insert for finishing mild steel


DNMG-ZM
Negative relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DNMG*E-ZM
Negative relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DNMM-57
Negative relief ang., M class, 55deg rhombic insert, for heavy cutting


2QP-DNGA
Negative relief angle, G class, 55 deg rhombic CBN insert


2QP-DNGM-HM
Negative relief ang., G class, 55deg rhombic CBN insert, with chipbreaker for medium cutting to roughing


2QP-DNGM-HS
Negative relief angle, G class, 55 deg rhombic CBN insert with chipbreaker for finishing hardened steel.


2QP-DNGM-HF
Negative relief angle, G class, 55 deg rhombic CBN insert with chipbreaker for finishing


2QP-DNGM-HP
Negative relief ang., G class, 55deg rhombic CBN insert with chipbreaker for finishing of hardened steel


4QP-DNGA
Negative relief ang., G class, 55deg rhombic CBN insert


DNGA-QBN
Negative relief ang., G class, 55deg rhombic CBN insert


DNGA-DIA
Negative relief ang., G class, 55deg rhombic PCD insert


DNMM-DIA
Negative relief angle, M class, 55 deg rhombic PCD insert


DNMG-28
Negative relief ang., M class, 55deg rhombic insert, for semi-finishing


DNMG-THS
Negative relief ang., M class, 55deg rhombic insert, for medium to heavy cutting


DNMG-TQ
Negative relief ang., M class, 55deg rhombic insert, for finishing to medium cutting


DNMG-AM
Negative relief ang., M class, 55deg rhombic insert, for high-feed machining in medium of steel


DNMG-HRF
Negative relief ang., M class, 55deg rhombic insert, for finishing of super alloy


DNMG-HRM
Negative relief ang., M class, 55deg rhombic insert, for medium cutting to finishing of super alloy


DNMG-FW
Negative relief ang., M class, 55deg rhombic insert with wiper edge, for finishing.


DNMG*E-FW
Negative relief ang., M class, 55deg rhombic insert with wiper edge, for finishing.


DNMG-SW
Negative relief ang., M class, 55deg rhombic insert with wiper edge, for finishing to medium cutting.


DNMG*E-SW
Negative relief ang., M class, 55deg rhombic insert with wiper edge, for finishing to medium cutting.


DNMG-SA
Negative relief ang., M class, 55deg rhombic insert, for medium cutting


DNMA*E
Negative relief ang., M class, 55deg rhombic insert, without chipbreaker for finishing to medium cutting


4QS-DNGA
Negative relief angle, G class, 55 deg rhombic CBN insert


4QS-DNGG-HM
Negative relief ang., G class, 55deg rhombic CBN insert with chipbreaker


4QS-DNGG-HS
Negative relief angle, G class, 55 deg rhombic CBN insert with chipbreaker for finishing hardened steel.


4QS-DNGG-HF
Negative relief angle, G class, 55 deg rhombic CBN insert with chipbreaker


4QS-DNGG-HP
Negative relief ang., G class, 55 deg rhombic CBN insert with chipbreaker for finishing hardened steel


4QP-DNGG-HF
Negative relief ang., G class, 55deg rhombic CBN insert with chipbreaker for finishing


4QP-DNGG-HM
Negative relief ang., G class, 55deg rhombic CBN insert with chipbreaker for medium cutting to roughing


FNMG*E-TM
Negative relief ang., M class insert with corner angle 45 degree for existing toolholder carrying DN**1104**E insert.


FNMG*E-TSF
Negative relief ang., M class insert with corner angle 45 degree for existing toolholder carrying DN**1104**E insert.


2QP-FNGA
Negative relief ang., G class CBN insert with corner angle 45 degree for existing toolholder carrying DN**1504 insert.


2QP-FNGG-HP
Negative relief ang., G class CBN insert with corner angle 45 degree for existing toolholder carrying DN**1504 insert.


DXMU-TS
Double sided 55 deg rhombic M class insert with TS chipbreaker for finishing to medium cutting


DXGU-TS
Double sided 55deg rhombic inserts with TS chipbreaker for finishing to medium cutting


DXGU-SS
Double sided 55deg rhombic inserts with SS chipbreaker for finishing (low cutting force)


DXGU-JTS
Double sided 55deg rhombic inserts with JTS chipbreaker for finishing to medium cutting


DXGU-JSS
Double sided 55deg rhombic inserts with JSS chipbreaker for finishing (low cutting force)


DXGU-JRP
Double sided 55deg rhombic inserts with JRP chipbreaker for finishing


DXGU-JS
Double sided 55deg rhombic inserts with JS chipbreaker for finishing to medium cutting


4QS-DXGQ
Double sided 55 deg rhombic CBN insert for finishing hardened steel


4QS-DXGU-HP
Double sided 55 deg rhombic CBN insert with chipbreaker for precision finishing hardened steel


EPGTR/L-J08
Positive 11 deg relief angle, G class, 75 deg rhombic insert, for finishing


EPGT-JS
Positive 11 deg relief angle, G class, 75 deg rhombic insert, 3 dimensional type chipbreaker for cutting on small lathes


EPGTR/L-W08
Positive 11 deg relief angle, G class, 75 deg rhombic insert, 1ead type chipbreaker for finishing


EPGW-DIA
Positive 11deg relief ang., M class, 75deg rhombic PCD insert


1QP-EPGW
Positive 11deg relief ang., G class, 75deg rhombic CBN insert


HNGD
DimpleFX series, Negative relief ang., Hexagonal ceramic insert with dimple for cast iron cutting


LNMXR/L-TDR
Insert for steel cutting


LNMXR/L-TWR
Insert with wiper edge


LNMXR/L-MDR
Insert for stainless steel cutting


POMG-MNW
Negative relief ang., M class, pentagonal insert for high feed and high depth of cut


RCGT-AL
Positive 7deg relief ang., G class, round insert, for aluminum cutting


RCMM-61
Positive 7deg relief ang., M class, round insert, for heavy cutting


RCMT-61
Positive 7deg relief ang., M class, round insert, for heavycutting


RCMT-CM
Positive 7deg relief ang., M class, round insert, for multi-purpose cutting of grey and ductile cast iron


RCMT-RS
Positive 7 deg relief angle, M class, round insert, for finishing to medium cutting


RCMT-6RS
Positive 7deg relief ang., M class, round insert, for low cutting force. 6 indexes are available.


RCMT-6RM
Positive 7deg relief ang., M class, round insert, for general use. 6 indexes are available.


RCGX-E/T1
Positive relief ang., round ceramic insert without chipbreaker for machining high temperature alloy


RNGA
Negative relief ang., G class, round insert, without chipbreaker for finishing to medium cutting


RNGN
Negative relief ang., G class, round insert, without chipbreaker for finishing to medium cutting


RNGN-E/T1
Double-sided round ceramic insert without chipbreaker for machining high temperature alloy


RNMG-61
Negative relief ang., M class, round insert, for heavy cutting


RT
Positive relief ang., special round inserts


S-RNGN
Negative relief ang., G class, round solid CBN insert


S-TNGN
Negative relief ang., G class, triangular solid CBN insert


SCMT-23
Positive 7deg relief ang., M class, square insert, for finishing to medium cutting


SCMT-24
Positive 7deg relief ang., M class, square insert, for medium cutting


SCMT-CM
Positive 7deg relief ang., M class, square insert, for multi-purpose cutting of grey and ductile cast iron


SCMT-PM
Positive 7deg relief ang., M class, square insert, for medium cutting


SCMT-PS
Positive 7deg relief ang., M class, square insert, for finishing to medium cutting


SNGD
DimpleFX series, Negative relief ang., G class, square ceramic insert with dimple for cast iron cutting


SNGG-01
Negative relief ang., G class, square insert, for precision finishing


SNGGR/L-B
Negative relief ang., G class, square insert, for precision finishing


SNGGR/L-C
Negative relief ang., G class, square insert, for precision finishing


SNGGR/L-D
Negative relief ang., G class, square insert, for precision finishing


SNGGR/L-P
Negative relief ang., G class, square insert, for medium cutting


SNM/GA
Negative relief ang., M/G class, square insert, without chipbreaker for finishing to medium cutting


SNMG
Negative relief ang., M class, square insert, all-round chipbreaker for medium cutting


SNMG-11
Negative relief ang., M class, square insert, for finishing


SNMG-17
Negative relief ang., M class, square insert, for finishing of mild steel


SNMG-27
Negative relief ang., M class, square insert, for finishing to medium cutting


SNMG-33
Negative relief ang., M class, square insert, for medium cutting


SNMG-37
Negative relief ang., M class, square insert, for medium cutting


SNMG-AS
Negative relief ang., M class, square insert, for high feed and small depth of cut


SNMG-CF
Negative relief ang., M class, square insert, for finishing of grey and ductile cast Iron


SNMG-CH
Negative relief ang., M class, square insert, for medium to heavy cutting of grey and ductile cast iron


SNMG-CM
Negative relief ang., M class, square insert, for medium cutting of grey and ductile cast iron


SNMG-DM
Negative relief ang., M class, square insert, for medium cutting


SNMG-HMM
Negative relief ang., M class, square insert, for medium cutting of super alloy


SNMG-NS
Negative relief ang., M class, square insert, for finishing


SNMGR/L-S
Negative relief ang., M class, square insert, for medium cutting


SNMG-SA
Negative relief ang., M class, square insert, for medium cutting of stainless steel etc.


SNMG-SF
Negative relief ang., M class, square insert, for finishing of stainless steel


SNMG-SH
Negative relief ang., M class, square insert, for medium to heavy cutting of stainless steel


SNMG-SDM
Negative relief ang., M class, square insert for medium cutting


SNMG-SM
Negative relief ang., M class, square insert, for medium cutting of stainless steel


SNMG-SS
Negative relief ang., M class, square insert, for finishing of stainless steel etc.


SNMG-TF
Negative relief ang., M class, square insert, for precision finishing


SNMG-TH
Negative relief ang., M class, square insert, for medium to heavy cutting


SNMG-THS
Negative relief ang., M class, square insert, for medium toheavy cutting


SNMG-TM
Negative relief ang., M class, square insert, for medium cutting


SNMG-PM
Negative relief ang., M class, square insert for medium cutting


SNMG-TS
Negative relief ang., M class, square insert, for finishing


SNMG-TSF
Negative relief ang., M class, square insert, for finishing


SNMG-PS
Negative relief ang., M class, square insert for finishing


SNMG-ZF
Negative relief angle, M class, square insert for finishing mild steel